|
|
|
Nemo10 Embedded Device Server Module with built-in UART |
Overview
The Nemo10 is a compact and low-cost
embedded device
server that is designed for OEM users who are wishing to
embed Ethernet connectivity directly onto the circuit boards
of equipment like security systems, POS, factory machinery,
and medical devices.
The Nemo10 device server has a standard pin space with a
dual-in-line, 24-pin design for onboard installation that lets
you shorten the layout time and get your product to market in
no time.
Features
- Single-chip DIL type Ethernet controller for onboard installation.
- Compact size 45mm x 45mm x 18.5mm.
- Built-in UART for device interface, data transfer rate up to 115Kbps.
- Supports 10Base-T Ethernet interface.
- Supports ARP, IP/ICMP, TCP, Telnet, DHCP, PPPoE
- Reliable TCP/IP protocol stack.
- PPPoE protocol for DSL connection to broadband network.
- Configuration using Telnet or Config command via serial interface.
- Management software for configuration and administration.
- +5v Input, 0.3w low power consumption.
Specifications
| Nemo10 | |||||
| Hardware | 80C51 8-bit microprocessor | ||||
| 32KB SRAM | |||||
| 64KB EEPROM | |||||
| External Interface Pins | 24 pin
Dual In Line connector interface for
|
||||
| Device Interface | Built-in UART | ||||
| Serial speeds 1200bps to 115Kbps | |||||
| Flow Control: Hardware RTS/CTS | |||||
| Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND | |||||
| Network Interface | 10 Base-T Ethernet | ||||
| Supports static and dynamic IP address | |||||
| Protocols |
ARP, IP/ICMP TCP Telnet DHCP client PPPoE |
||||
| Security | User ID & Password | ||||
| Management |
|
||||
| Power | Supply voltage = 5V DC 10% | ||||
| Supply current = 60mA / 5V DC | |||||
| Environmental | Operating temperature: 0°C to 50°C | ||||
| Storage temperature: -20°C to 66°C | |||||
| Humidity: 90% Non-condensing | |||||
| Physical Properties | Dimension
(LxWxH)
|
||||
| Weight: 20g | |||||
| Warranty | 1-year Limited Warranty |
Ordering
Information
| Model | Description |
| Nemo10 | Nemo
10BaseT serial device server module |
| Nemo10-SK | Starter Kit for Nemo10 |
Includes:
|
